Sundial
Tuotteet Yritys Palvelut Referenssit Jälleenmyyjät Aurinkolämpö Tarjouspyyntö LIVE
Tuoteryhmät
Uutiset
01.07.2019
Sundial Finland oy:n omistus vaihtuu
Vaihdos aiheuttaa päivityksiä ja muutoksia, jonka takia verkkokauppa ja muu liiketoiminta keskeyty...
Lue lisää
28.01.2019
Sundial ja NHK-Keskus yhteistyöhön
     Sundial on sopinut yhteistyösopimuksen NHK-Keskus Oy:n kanssa.  NHK otta...
Lue lisää
Heatbloc K38 - DN 32
[39082]
Lisätiedot

Flat-sealing connections 2" external thread
with 2" union nut for assembly on PAW distribution manifolds
with PAW mounting equipment, the HeatBloCs can be installed on wall brackets

Large ball valve handles,
easy handling, visible closing position

4-way mixing valve
completely made of brass, when installed separately it can be used in combination with a boiler circuit pump (a change in the boiler circuit with closed flow line is possible). When installed on a distribution manifold the return line of the mixing valve must be equipped with a non return valve to avoid unwanted circulation.
For mounting actuators of other manufacturers, you need the adapter set item no. 705580.

PAW actuator SR5
with 1.5 m cable and mounting set for snap-in assembly on the mixing valve, suited for flow on the right or left side, change-over switch for manual / automatic operation, supply 230 V / 50 Hz, torque 5 Nm

EnEV conform functional insulation
made of durable elastic EPP, complete insulation of valves and fittings, ventilation opening to cool the pump

Free access to the pump head
by simply removing the front insulation shell

Check valve in the return pipe
can be opened, 200 mm wc, spring-loaded, thus suited for horizontal and overhead installation

All water-carrying parts are made of brass

Full metal thermometers
can be pulled off, with immersion sleeve integrated in the ball valve

PAW heating pumps with high-efficiency (ECM) technology
fitted with 2 m cable, completely premounted, integrated in the insulation, pressure tested, with serial number, perfectly designed system, pump characteristics, EuP/ErP READY

Pump can be isolated,
so that it can be replaced without draining

Tekniset tiedot

Operating data
Max. pressure: 6 bars
Kvs value: 7,3
Max. operating temperature: 110 °C
Equipment
Check valves: 1 x 200 mm wc
Thermostat: Measuring range: °C
Dimensions
Nominal diameter: DN 32
Connection generator: 2" ext. thread, flat sealing
Connection consumer: 1¼" internal thread
Installation length: 385 mm
Width: 250 mm
Height: 438 mm
Centre distance: 125 mm
Materials
Valves and fittings: Brass
Gaskets: EPDM / NBR
Insulation: EPP
Esitteet

K38 - DN 32.pdf
Lisää tietoa tuotteen kotisivulta.
 Takaisin 
 Arviot 
Copyright © Sundial Finland Oy | Evolution Solutions Verkkokaupparatkaisu
Luottettava kumppani